Screw type metering supply device (SFC)
No.
M-Pack
Intro.
Foreword: Liquid paint coating can control the inaccuracy of film thickness to a minimum.That is due to applications such as fluid regulators, gear metering pumps, and syringe pumps.
For powder coating, the only way of powder coating is venturi type powd
For powder coating, the only way of powder coating is venturi type powd
Feature：
- Improve the metering stability and reproducibility of powder flow rate.
- Improve the dispersion of powder.
- Can be adjusted according to the powder, the length of the powder hose, and the air pressure.
- The powder flow rate and transfer air can be adjusted independently
- Digitizing the powder flow rate, it is easy to manage.
- Average saving powder can reach at least 20%
Specification：
| M-Pack screw type metering | |
| Feature | Single color or general use |
| Method of installation | Side of powder supply hopper |
| Powder flow rate(1 gun)*1 | 50～300g/min( use general powder ) |
| Required air pressure | 500～1,000(Max.)kPa |
| Max. air consumption(1 gun)*2 | 7Nm3/h |
| Max. water content in the air | 1.3g/Nm3 |
| Max. oil content in the air | 0.1ppm |
| Power consumption *3 | 230VA |
* The powder flow rate, 20g/min.-50g/min., 300g/min-500g/min are special specification
*Air consumption does not include the consumption of fluidized bed hopper. SFC-QM, QH: 11Nm3/h
*SFC-QS 230VA Series: one spray gun will increase 100VA .
SFC-QM 460VA,SFC-QH1000VA series: one spray gun will increase 200VA .
